Contact Us

Tel:+86-536-5295955

Fax:+86-536-5522139

Mob:+86-18463661812

welcome your enquiry anytime

Home > News > Content
(manufacturer) Self Adhesive Aluminum Bitumen Tape May 26, 2017


(manufacturer) Self Adhesive Aluminum Bitumen Tape Product Detail

Basic Info

  • Type:Roofing and Waterproofing

  • Ceiling Tile Shape:Roll

  • Material:Bitumen

  • Thickness:1.0mm-4.0mm

  • Surface Treatment:Film Coated

  • Function:Waterproof

  • Certification:ISO, MSDS, CE

  • Color:Many Colors

  • Usage:Outdoor

  • Enter Attribute Here (e.g.: Size):Enter Value Here (e.g.: 12 Inches)

  • Specification:A level of quality, e. g CE, RoHS, SGS, GMP, etc.

  • Origin:China.

  • HS Code:68071000

(manufacturer) Self Adhesive Aluminum Bitumen Tape Product Description

SELF ADHESIVE BITUMEN FLASH BAND/SEALING TAPE

(manufacturer) Self Adhesive Aluminum Bitumen Tape DESCRIPTION

Self adhesive bitumen sealing tape is a self-adhesive, aluminum or high density polyethylene surfaced bitumen & SBS rubber backed sealing strip. It is a quick, efficient and cost effective method of flashing, sealing and repair that produces a lasting protection in all climates.

FEATURES
* Provides an instant seal
* Easily applied by hand pressure only
* Safe application, no pollution
* Available in wide range of widths, thickness, colors

USAGE
* Replacement or repair of flashing
* Guttering, down pipes, skylights
* Extensions, porches, window frames
& chimneys, jointing for artificial grass
* Caravans & Conservatories
* Sealing parapets, valley gutters
* Seals capping bolts & roof ridges
* Roof repair of portable buildings

APPLICATION
The application temperature should be between 5 degree to 45 degree. The installation procedures are to be as follows:
1. Unroll only the required length and cut the pieces to the desired shapes and size.
2. Place the pieces of membrane on the area to be covered and check whether they match will the profile of the marked substrate.
3. Peel off the release film and carefully place the membrane so as to ensure a minimum of 50mm overlap and then smoothen the membrane from the centre to the edges in order to dive out entrapped air
TECHNICAL DATA
Property Data Test Method
Thickness 1.0mm, 1.2mm, 1.5mm -
Backing type Aluminum foil, HDPE film -
Adhesion to Primed Concrete > 250N ASTM D 1000
Adhesion to Steel > 250N ASTM D 1000
Elongation % > 30 BS 2782
Tension N/50mm > 200 -
Temperature Resistance -25 degree /+90 degree -

PACKING
Available in 50 mm, 75 mm, 100 mm, 150 mm, 200 mm, 225 mm, 250 mm, 300 mm rolls of
2.5 m, 3.0 m, 5.0 m, 1 0m, 20 m length

(manufacturer) Self Adhesive Aluminum Bitumen Tape Special sizes made to order

STORAGE
Store under cover, out of direct sunlight and protect from extreme temperature. In tropical climates the product must be stored in an air-condition environment. Shelf life is up to 12 months when stored as per recommended storage condition.

HEALTH & SAFETY
As with all bitumen products caution should always be exercised. Protective clothing such as gloves and goggles should be worn. Treat any splashes to the skin or eyes with fresh water immediately. Should any of the product be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately.


(manufacturer) Self Adhesive Aluminum Bitumen Tape.jpg