Self Adhesive Bitumen Tape, Flashing Band

May-16-2017

Self Adhesive Bitumen Tape, Flashing Band Product Detail

Self Adhesive Bitumen Tape, Flashing Band Basic Info

Model NO.:HY
Type:Roofing and Waterproofing
Ceiling Tile Shape:Roll
Material:Bitumen
Thickness:1.2mm
Ceiling Tile Type:Building Roof
Surface Treatment:Film Coated
Function:Waterproof
Certification:ISO, CE
Color:Black
Usage:Outdoor
Width:5cm to 100cm

The product is a kind of polymer modified asphalt materials, using polyester carpet or glass mat for the matrix, the surface covered with polyethylene film, aluminum foil or fine sand, the back is covered with a release sheet,keep the self-adhesive modified bitumen flexible and waterproof. The product has a good self-adhesive and bending properties.

Construction and other base face is simple, clean, and can be widely used in roofing, basement, bathroom, etc. waterproofing works, and for legislation to pave and stick and pipe wall (except heat pipes), bridges , and other complex environment, especially in open flame is prohibited, covert fire waterproofing works.

Self Adhesive Bitumen Tape, Flashing Band Product Features:

Self-adhesive modified bitumen membrane with a self-adhesive surface of the waterproofing, sealing material, divided into with base membrane and without base membrane.And one side with self-adhesive layer and two sides with layers two kinds.The self-adhesive layer has covered with release sheept. the material of realease sheet also has a few kinds. all the self-adhesive layers no need glue, just because the adhesive of itself, which is acaused by the modified bitumen. Low-temperature-resistant properties of the product, and the MTR, tunnels and the scene of the fire with the best waterproof, moisture resistance and sealing materials, also apply to pipeline waterproof, anti-corrosion works.
Technical data:
[Physical

Thickness(mm)	width(mm)	Area(m2)
1.2	1000	20
1.5		20
2.0		15

Self Adhesive Bitumen Tape, Flashing Band Property

The product meets the industry standard JC 840-1999 "self-adhesive plastic bitumen waterproofing membrane". The requirements to main physical properties are listed in table 2.
Table 2 physical properties

No.
1			PE	AL	N
2	Water impermeability	Pressure,MPa ≥	0.2	0.2	0.1
		Retention time,min ≥	120,water impermeable
3	Heat resistance°C		-----	80 No slippage, flowing, dropping.	--
4	Tensile force N/50mm ≥		130	200
5	Elongation at break,% ≥		450	200	450
6	Softness		-20°C,Φ20mm,3s,180°C. No crack.		--
7	Shear performance N/mm	Between membranes ≥	2.0 or fracture on the external agglutination section		fracture on the external agglutination section
		Between membrane and aluminum plate ≥
8	Peel strength,N/mm ≥		1.5 or fracture on the external agglutination section		fracture on the external agglutination section
9	Puncture resistance			water impermeable
10	Aging by artificial climate	Appearance		No crack, no bubble.	---
		Tensile force retention percentage,%		80	---
		Softness at low temperature,°C		-10°C,Φ20mm,3s,180

Storage and Transportation

1. Different items, models dimension and grades should be stored separately.
2 .Put the product in a dry, ventilated place with the height less than 5 layers .
3. Guarantee period is a year in normal environment.
4. All the rolls should be erect without any putting across or incline. Cover the canvas when necessary.

Description	Width	Length	Thickness	Weight
modified bituminous sheet materials(SBS/APP) with PE film(PE)	1m	10m	2mm	32kg/roll
	1m	10m	3mm	45kg/roll
	1m	8m	4mm	48kg/roll
modified bituminous sheet materials(SBS/APP) with mineral granule (M) or sand(S)	1m	10m	3mm	45kg/roll
	1m	8m	4mm	48kg/roll
modified bituminous sheet materials(SBS/APP) with aluminum film(Al)	1m	10m	2mm	32kg/roll
	1m	10m	3mm	44kg/roll
	1m	8m	4mm	47kg/roll
Self-adhering polymer modified bituminous waterproof sheet	1m	20m	1.2mm	42kg/roll
	1m	20m	1.5mm	46kg/roll
	1m	15m	2.0mm	44kg/roll
	1m	10m	3.0mm	45kg/roll
	1m	8m	4.0mm	48kg/roll